Fits 2015-2023 Ford Mustang 2.3L Ecoboost engines.
This Flowmaster mid-pipe system fits 2015-2023 Ford Mustangs with the 2.3L Ecoboost engine and is a great way to increase the sound level and performance of your Pony by removing the factory resonator. These Y-pipe assemblies use Flowmaster's exclusive D-port technology and can be used with either the factory rear mufflers or with one of our Axle-back exhaust systems. Constructed with mandrel-bent 2.50-inch stainless steel tubing flowing into a Scavenger Series Y-collector, then splitting into dual 2.25-inch mandrel-bent stainless steel tubing to connect to the axle back muffler assembly. Includes all parts, necessary hardware and easy to follow instructions for installation. Covered by our Flowmaster Lifetime Limited Warranty. Notes: Fits coupes and convertibles.
- Bolts up to the Factory Mufflers or Flowmaster Axle-backs
- Lifetime Limited Warranty
- Easy Installation
- Mandrel-bent 409 Stainless Steel Tubing
- Dyno Tuned For Maximum Performance
- Uses the Factory Hanger Locations
- Eliminates the Factory Resonator
- Includes all Necessary Hardware
- Increases the Sound and Power
- Scavenger Series Y-collector
Information:
Fits 2015-2023 Mustang 2.3L Ecoboost engines, Coupes and Convertibles
Application Summary:
| Year |
Make/Model |
| 2015-2023 |
Ford Mustang |
| Attributes |
| Automotive Item Grade |
High Performance, High Performance |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Mandrel Bent Tubing |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
Yes |
| Color |
Raw/Bare, Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Pipe Wall Max Gauge |
16 |
| Exhaust Pipe Wall Maximum Gauge |
16, 16 |
| Finish |
Natural |
| Flanged Inlet |
No |
| Gasket Or Seal Included |
No |
| Grade Type |
Performance |
| Hanger Included |
No |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No |
| Inlet Attachment Type |
Clamp-On |
| Inlet Connection Type |
Slip-Fit, Slip-Fit |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
2.12 |
| Inlet Outside Diameter |
2.25 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/4 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mount Type |
Yes, Yes |
| Mounting Bracket Included |
No |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment Type |
Clamp-On |
| Outlet Connection Type |
Slip-Fit, Slip-Fit |
| Outlet Diameter |
2.500 in., 2.25 |
| Outlet Diameter (in) |
2.25 |
| Outlet Inside Diameter |
2.13 |
| Outlet Outside Diameter |
2.25 |
| Overall Length |
47.000 in., 47.00 |
| Overall Length (in) |
47 |
| Overall Length (in.) |
47.000 in. |
| part type |
Exhaust Y Pipe, Exhaust Y Pipe |
| Pipe Diameter |
2.25 |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| Quantity |
1 |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
X-Pipes and Crossovers |
| System Type |
Exhaust Accessory, Exhaust Accessory |
| Tube Diameter |
2-1/4 inch, 2-1/4 |
| Universal Or Specific Fit |
Specific |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| GTIN |
00700042032051 |
